太陽能板 1W 80x100mm

產品說明

該太陽能電池板由單晶材料製成，在17％的太陽能轉換效率下具有很高的性能。它具有良好的樹脂表面和堅固的背部適合戶外環境。
面板附有一個2mm JST連接器，可與大多數能夠使用太陽能供電的 MCU單片板或嵌入式系統配合使用。（如Seeeduino微控制器系列，Lipo Rider充電板系列和XBee載體WSN產品系列）
典型的開路電壓大約為5V，取決於光強度。在晴朗日照充足的夏日，峰值OC電壓可以高達10V。為防止高電壓對 MCU 板或嵌入系統的損壞，需要透過穩壓板進行保護，如Lipo Rider，建議在連接之前檢查OC電壓是否安全。

產品規格

• 尺寸：100x80x2.5（±0.2）mm
• 典型電壓：5.5V
• 典型電流：170mA
• 開路電壓：8.2 V
• 最大負載電壓：6.4V

1W Solar Panel 80X100

This solar panel is made of single-crystal material that performs high solar energy transformation efficiency at 17%. It has a fine resin surface and sturdy back suitable for outdoor environments. A 2mm JST connecter is attached to the penal, which makes it perfect to team up with most of our can-use-solar-power-supply boards, like Seeeduino microcontroller series, Lipo Rider charging boards series and XBee carrier WSN products series.  

The typical open circuit voltage is around 5V, depending on light intensity. In those bright summer days with clear sky and big sun, the peak OC voltage can rush up to 10V. To prevent any damage to boards that accept a narrow range of input voltage, like Lipo Rider, it’s recommended to check whether the OC voltage is safe before any connection.

Features

• Dimensions: 100x80x2.5(±0.2) mm
• Typical voltage: 5.5V
• Typical current: 170mA
• Open-circuit voltage: 8.2 V
• Maximum load voltage: 6.4V

Documents

Please visit our wiki page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.

更多清單請下載

• 太陽能板 1W 80x100mm x 1